+7 (499) 951-79-41

+7 (499) 649-00-41

120 (8th floor), 6

Bratislavskaya Street, Moscow

mon - fri 9 am - 6 pm

All materials are property of their owner, and are protected by the law of the Russian Federation "On Copyright and Related Rights". Using text and photos without written permission forbidden.

© LLC, TD Plastmass Group 2019

INN 7723909200

KPP 772301001

BASE TYPE

ZX-750V5T

High speed and heat are his speciality

ZX-750V5T - is a thermoplastic material with antifriction characteristics based on polyimide (PI).

The latest development in the field of materials for high speeds and high temperatures. Particularly suitable for sliding speeds beyond 200 m/min and temperatures exceeding 300 °C.
Plain bearings slideways made of polymers ZX-750 should be applied if the use temperature exceeds +100°C, and the durability and dimensional stability need some improvement.

FEATURES

  • Stiff, hard, tough

  • High dimensional stability

  • High fatigue strength

  • Chemical resistance to solvents, dilute acids, alkalis, petroleum products

  • Good machinability, suitable for bonding and welding

  • Suitable for use in vacuum

  • Contains PTFE

CHARACTERISTICS

  • Working temperature: -250°C to +300°C (+320°C)

  • Surface pressure (p): max. 41 (125) MPa

  • Sliding speed (v): max. 350 m/min

  • Fatigue (S): tensile fatigue strength at 20 °C and 1E06 stress cycles, 1 Hz = 35 MPa

  • UV-radiation: resistant (1000 hours Xenon DIN 53597). Gamma-radiation: Limit absorbed dose 8000 kGy

  • Water: max. water absorption: 0.7 %, up to +120°C resistant

  • Fire behavior: Oxygen index (LOI): 52 %, classification: V-0 (UL94). Fireproof

ADVANTAGES

The advantages of ZX-750V5T over PEEK (polyetheretherketone):

  • 10 times higher pv-value, the best results of the work without lubrication

  • 5 times higher notch impact strength

  • 20-80 times higher durability when operating up to +100°C

SUPPLY

Rods (diameter 6÷210 mm)

Tubes (outer diameter 30÷350 mm)

Sheets, thickness of 6; 8, 10; 15; 20; 26; 32 (370x1000 mm or 370x2000 mm)

Sheets, thickness of 24 mm (120x1000 mm or 120x2000 mm)

Details based on customer’s drawings

Granulate

CAN WE HELP YOU?

If you have any questions about our products or materials or you can not find the information you are looking for, contact us via phone or email. Our team is at your disposal at any time and with pleasure.

LEARN MORE ABOUT THE SUPPORTED INDUSTRIES.