+7 (499) 951-79-41

+7 (499) 649-00-41

120 (8th floor), 6

Bratislavskaya Street, 109341 Moscow

mon - fri 9 am - 6 pm

All materials are property of their owner, and are protected by the law of the Russian Federation "On Copyright and Related Rights". Using text and photos without written permission forbidden.

© LLC, TD Plastmass Group 2019

INN 7723909200

KPP 772301001

ZX-324 MODIFICATION

Specifications of the modified ZX-324

All the latest modifications ZX-324 have a much more improved wear resistance and have a sufficiently large pv-rate in comparison with the standard one. Thus, the polymers ZX-324V11T and ZX-324V2T have 5 times bigger pv-value than PEEK. Such modifications are applied for improvement of the tensile strength. These models are among the best in the family and have a number of quite good characteristics of various types which are specified in the table below.

APPLICATION PARAMETERS

ADVANTAGES

ZX-324V1T

PEEK polymer-fortified. High elastic recovery, high elasticity. The temperature of application over 140°C – harder and tougher than PEEK.

ZX-324V2T

PEEK-, PTFE-modified. Low friction. Acceptable elasticity. High PV-value, high wear resistance.

ZX-324V11T

PEEK polymer-fortified. Despite high stiffness still high elongation. High PV-value with a relatively slow sliding speed.

ZX-324VMT

PEEK fibre-reinforced, PTFE
highest stiffness and wear resistance.

ZX-324GF30

PEEK glassfibre-reinforced
thermoplastic, composite, synthetic material based on polyetheretherketone, glass fiber reinforced (30%)

ZX-324UG30

PEEK reinforced with carbon fiber (30%)
thermoplastic, composite, synthetic material based on polyetheretherketone (PEEK)

TEMPERATURE (T)

ZX-324V1T

-100°C to +250°C (+260°C)

ZX-324V2T

-50°C to +250°C (+260°C)

ZX-324V11T

-200°C to +250°C (+260°C)

ZX-324VMT

 -50°С to +250°С (+260°С)

ZX-324GF30

-60°С to +250°С (+310°С)

ZX-324UG30

-60 °C to + 240 °C (+ 340 °C)

SURFACE PRESSURE (P), MAX.

ZX-324V1T

41 (120) MPa41 (120) MPa

ZX-324V2T

40 (85) MPa

ZX-324V11T

50 (110) MPa

ZX-324VMT

57 (150) MPa

SLIDING SPEED (V), MAX

ZX-324V1T

100 m/min

ZX-324V2T

200 m/min

ZX-324V11T

100 m/min

ZX-324VMT

100 m/min

FATIGUE (S), MAX.

ZX-324V1T

70 MPa

ZX-324V2T

56 MPa

ZX-324V11T

65 MPa

ZX-324VMT

105 MPa

* Values in the brackets are valid for short-term service

ZX-324 MODIFICATIONS FORMS OF SUPPLY

Rods (optional)

Pipes (optional)

Sheets (optional)

Production of the details based on drawings and customer's samples.

Colour: beige

ZX-324 GF30 PEEK modification – is a thermoplastic material based on Polyetheretherketone, glass fiber reinforced (30%). ZX-324 GF30 PEEK is characterized by a higher mechanical strength, hardness and creeper resistance than unfilled peek. 


Glass fibre reinforced plastic ZX-324 GF30 PEEK is ideal for conditions, which require to withstand long-term static loads at elevated temperatures.

Basic characteristics:

  • High maximum allowable working temperature in the air (+250°C with constant exposure and up to +310°C for short periods)

  • Excellent friction-wear characteristics

  • High chemical resistance to aggressive environments and corrosion

  • High dimensional stability. Yield strength high at elevated temperatures

  • Excellent resistance to high-energy radiation (gamma and x-radiation)

  • Flame retardant (V-0 according to UL94). Low flammability and very low levels of smoke when burning

  • Insulator - fiberglass is not susceptible to electrochemical corrosion

  • ZX-324 GF30 PEEK thermoplastic is resistant to hot water and hot steam

  • Minimum moisture absorption, practically equal to zero

  • Meets FDA requirements for contact with food products

Thanks to the excellent tribological characteristics, good dimensional stability and ease of machining high-precision parts are made from ZX-324 GF30 PEEK blanks: rollers, gears, worm wheels, parts of pumps, saddles of ball valves, high temperature insulators; supporting disks, rings, pads; bearings of hydraulic turbines and hydro-generators; parts exposed to boiling water, steam and other friction pairs.

ZX-324 GF30 PEEK works with a high degree of efficiency, reliability and safety where fluoropolymers do not manage. It is advantageous to replace metal parts (bronze, special steel, cast iron). The material has the best durability, is not affected by linear expansion, and is resistant to vibration and shock loads. Due to the high strength the fiberglass is called «light metal», but compared to metal they have a lower density and thermal conductivity, and most importantly, it is corrosion resistant.

Small specific gravity of ZX-324 GF30 PEEK makes it convenient for application in the transport sector, as the savings in weight means economy in energy. Moreover, by reducing the weight of transport structures (ships, cars, planes) their efficiency is also increased. High strength and durability of fiberglass finds its application where reliability and the guarantee of safety is required, for example, for the equipment on drilling rigs.

But the use of this material for the details of sliding is undesirable as fibreglass may damage the mating surface of the counterbody of a friction pair.

CAN WE HELP YOU?

If you have any questions about our products or materials or you can not find the information you are looking for, contact us via phone or email. Our team is at your disposal at any time and with pleasure.

LEARN MORE ABOUT THE SUPPORTED INDUSTRIES.