PLASTMASS™
PTFE PLASTIC

RODS

DIAMETER up to 210 mm

LENGTH on request

TUBES

OUTER DIAMETER up to 350 mm

LENGTH on request

 SHEETS 

THICKNESS up to 32 mm

DIMENSIONS up to 370 x 2000 mm

Our PLASTMASS™ PTFE (Polytetrafluorethylen) plastic is very resistant to  weather influences and chemicals. This fluoropolymer has low friction and is stable at higher temperatures. PTFE plastics are in general softer than other plastic materials. To improve the mechanical strength of this material it can be reinforced with glass fibre or carbon fibre. Our PTFE plastic is resistant to electricity and has excellent insulating properties. The low friction surface of PTFE makes it to an ideal material for machine parts.

If you have any technical questions about Polytetrafluorethylen plastics (polymers), please do not hesitate to contact us. Buy PTFE plastic by sending us an e-mail or contacting us by phone.

PTFE Bushings.jpg

PTFE PROPERTIES

  • Operation temperature
    -250 °C to +240 °C (+260 °C)

     

  • Surface pressure
    8 (12) MPa

     

  • Sliding speed
    250 m/min

     

  • Tensile fatigue strength at 20 °C
    10^6 stress cycles, 1 Hz = 7 MPa

PTFE CHARACTERISTICS

  • Good sliding properties

  • Hydrolysis resistance

  • Weathering resistant

  • No water absorption

  • Good machinability

  • Can be glued

  • Resistant to organic solvents, chemicals and petroleum products

  • High wear resistance

  • High stiffness and hardness

  • High modulus of elasticity in bending

  • Low thermal expansion

  • Low wear coefficient

  • Improved pv-value

We are at your disposal if you need technical advice on our materials and provide you all technical information.

CONTACT

+7 (499) 951-79-41

+7 (968) 404-13-85

English Hotline

ADDRESS

Bratislavskaya Street 6

109341 Moscow

Monday - Friday
9 am - 6 pm

Copyright © 2021 LLC, TD Plastmass Group. All Rights Reserved.