PLASTMASS™
PET PLASTIC

Most popular plastic

in various applications.

PLASTMASS™ PET – is a thermoplastic material based on polyethylene terephthalate with antifriction characteristics. PLASTMASS™ PET plastics works excellently where bronze is too expensive or not suitable for dry sliding as well as in case of insufficient lubrication. PLASTMASS™ PET plastics have higher bearing capacity and accuracy in dry sliding than the elements made of metal. Our plastics are manufactured under high quality standards in our factory in Russia.

ORDER NOW

MODIFICATIONS

FEATURES OF PET

Solid, tough, durable

High fatigue limit

Weather resistant

Chemical resistance to nearly all oils, coolant, fuel, weak acids

Suitable for welding and gluing, easy to process

Does not contain Teflon (PTFE) and silicone

Approved for use in drinking water systems

CHARACTERISTICS OF PET

Operating temperature: -100 °C to +110 °C (+140 °C)

Sliding speed without lubrication: 200 m/min

Fatigue: at 20°C and 10^6 stress cycles 1 Hz = 52 MPa

Dynamic friction coefficient without lubrication - 0,08

Fire behavior: oxygen index (LOI) 24%; flammability classification (sample thickness 3.2 mm): (UL94) – HB

ADVANTAGES OF PET

High reliability of sliding units with an increased service life
Reduces the costs for maintenance and repair of parts in your machines and equipment
Reduces the failure rate of tools and machines

SUPPLY OF PET

Granules

Rods (diameter 6 - 220 mm)

Tubes (outer diameter 30 - 380 mm)

Sheets, thickness: 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 mm
- Dimensions: 1000 x1000 mm, 1000 x 2000 mm
Sheets, thickness: 1.5 mm
- Dimensions: 200 x 1000 mm, 200 x 2000 mm
Sheets, thickness: 10, 12, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100, 114 mm
- Dimensions: 1000 x 1000 mm, 1000 x 2000 mm, 1250 x 1000 mm, 1250 x 2000 mm

On request, we also manufacture semi-finished products with larger dimensions and diameters

We manufacture finished parts based on samples and drawings

PLASTMASS™ PET plastic is a very popular material - thanks to its universal characteristics it is applied in almost all industries

Bushings, bearins, inserts, washers, guides, connecting parts, mechanism parts

The spare parts we manufacture can be used for many areas of application. Machine parts that are replaced by our PLASTMASS ™ PET finished parts increase the service life of the machine. Due to the long life of our materials, maintenance work on machines is reduced and possible damage is excluded. We offer our customers the finished parts at the best price-performance ratio.

The advantages of PLASTMASS™ PET plastics over caprolon (polyamide, caprolactam)

Lower coefficient of friction and wear
Coefficient of moisture absorption up to 0.3% (Caprolon coefficient of moisture absorption up to 2% - mechanical properties are reduced by two)
Frost resistance up to -100°C

The advantages of PLASTMASS™ PET plastics over fluoropolymer

Resistance to size change under pressure
Higher wear resistance

By replacing the elements of bearing from bronze with PLASTMASS™ PET plastics, you will achieve significant advantages

Sliding characteristics of PLASTMASS™ PET plastics are much better than bronze
Low coefficient of friction and improved anti-friction characteristics
Extend the service life up to 3 times and more
PLASTMASS™ PET runs without lubrication.
A failure in the lubrication system does not lead to an emergency situation, as in the case of using metal
Noise reduction of sliding nodes, shockproof and resistant to vibration
High positioning accuracy and smooth running at a low rotational speed
PLASTMASS™ PET is able to repel or absorb abrasive foreign particles and dirt
Higher resistance to chemicals in comparison with bronze
Corrosion resistant material

CAN WE HELP YOU?

If you have any questions about our products or materials or you can not find the information you are looking for, contact us via phone or email. Our team is at your disposal at any time and with pleasure.