PLASTMASS™
PEEK PLASTIC

PEEK Rods

DIAMETER up to 100 mm

LENGTH on request

PEEK Tubes

OUTER DIAMETER up to 350 mm

LENGTH on request

 PEEK Sheets 

THICKNESS up to 32 mm

DIMENSIONS up to 1200 x 2000 mm

PLASTMASS™ PEEK is a Polyetheretherketone high temperature and performance thermoplastic, which is ideal polymer for performance demanding applications. Our PEEK polymer is made for plastic parts which are operating at temperatures over 250 °C and pressures up to 15 MPa. PLASTMASS™ PEEK (Polyetheretherketone) plastic is very resistant to most organic and inorganic chemical compounds. These include alcohols, lubricating oils, cleaning agents, acids and alkalis, fuels for motor vehicles and airplanes, hydrolysis of hot water and steam, UV radiation.

 

​If you have any technical questions about Polyetheretherketone plastics (polymers), please do not hesitate to contact us. Buy PEEK plastic by sending us an e-mail or contacting us by phone.

PEEK Plastic Material | High Performance Plastic | Polyetheretherketone

PEEK Properties

  • Operating temperature
    -65 °C to +250 °C (+260 °C)
     

  • Tensile modulus
    4000 MPa
     

  • Flexural modulus
    3800 MPa
     

  • Compressive strength
    125 MPa
     

  • Tensile strength
    98 MPa
     

  • Flexural strength
    165 MPa

PEEK Characteristics

  • Hard, tough, with high fatigue strength

  • High tensile strength

  • PTFE- and Silicone-Free

  • Resistant to weathering

  • Easy to work with

  • Easy to bond and weld

  • High hydrolysis resistance

  • Suitable for vacuum

  • High dimensional stability

  • High yield strength at high temperatures

  • Resistant against corrosion

  • High chemical resistance

  • Excellent resistance against friction wear

PEEK Modifications

Our modified PEEK (Polyetheretherketone) plastic material is characterized by a higher mechanical strength, hardness and creep resistance than regular peek.PEEK modifications is able to replace bronze, special steel and cast iron. The reinforced PEEK thermoplastics are not affected by linear expansion and is able to absorb vibrations and shocks. Contact us to learn more about our modified plastic materials.

  • PEEK V1T
    High elastic recovery and high elasticity
     

  • PEEK V2T
    Modified with PTFE
     

  • PEEK V11T
    Fortified material
     

  • PEEK VMT
    Fibre-reinforced with PTFE
     

  • PEEK GF30
    30% glass fibre reinforced
     

  • PEEK UF30
    30% carbon fibre reinforced

We are at your disposal if you need technical advice on our materials and provide you all technical information.

CONTACT

+7 (499) 951-79-41

+7 (968) 404-13-85

English Hotline

ADDRESS

Bratislavskaya Street 6

109341 Moscow

Monday - Friday
9 am - 6 pm

Copyright © 2021 LLC, TD Plastmass Group. All Rights Reserved.