PLASTMASS™ PE 9000

PE 9000 Rods

DIAMETER up to 200 mm

LENGTH on request

 PE 9000 Sheets 

THICKNESS up to 200 mm

DIMENSIONS up to 2000 x 6000 mm

PLASTMASS™ PE is available as an ultra-high molecular weight Polyethylene and as a high molecular weight Polyethylene which we recommend for lining, sliding parts and guides. Our Polyethylene is divided into the types PE 500 (HMWPE) and PE 1000, PE 9000 (UHMWPE). The various PLASTMASS™ PE plastics are also available with different modifications for unique technical properties. We produce our polyethylene as semi-finished and finished parts. This includes sheets, tubes and rods with a large selection of dimensions.

 

Our Polyethylene materials have been developed to withstand the highest loads over a long service life. The material has extremely high wear resistance, a low coefficient of friction and high impact strength.

UHMWPE / HMWPE Plastic | Polyethylene | PE-500 | PE-1000  | Standard Plastic

PE 9000 - UHMWPE

Specific properties of our PE 9000 - UHMWPE:

  • Increased resistance to abrasion wear

  • Chemical resistant

  • Good noise damping

  • Excellent sliding qualities

  • Low friction coefficient

  • Very high wear resistance

  • High viscosity even at low temperatures (up to -200 °C)

  • High impact resistance

PE 9000 - UHMWPE OIL

Specific properties of our PE 9000 - UHMWPE OIL:

  • Excellent sliding qualities

  • No sticking and freezing

  • Very good noise damping

PE 9000 - UHMWPE GLS

Specific properties of our PE 9000 - UHMWPE GLS:

  • Excellent sliding properties, low coefficient of friction

  • No sticking and freezing

  • Very high strength and wear resistance

  • High bending and impact resistance

PE 9000 - UHMWPE MOS2

Specific properties of our PE 9000 - UHMWPE MOS2:

  • Improved sliding and abrasion resistance thanks to the addition of an anti-friction additive disulfide powder (MOS2)

  • Withstand of high mechanical loads

  • Low coefficient of friction and wear

  • Lowest level of abrasion

  • High bending and impact resistance

  • No water absorption

PE 9000 - UHMWPE HAW

Specific properties of our PE 9000 - UHMWPE HAW:

  • Excellent sliding qualities

  • No sticking and freezing

  • Very good wear resistance

  • High bending and impact resistance

PE 9000 - UHMWPE PROTECT

Specific properties of our PE 9000 - UHMWPE PROTECT:

  • Good acoustic insulation

  • High level of impact absorption and anti-adhesion properties

  • Operating in a wide temperature range from -180 °C to + 80 °C

  • Good chemical stability and no moisture absorption

General Polyethylene Characteristics

 

Common features of our polyethylene materials:

  • High wear resistance

  • Very good sliding properties

  • Self-lubricating (dry running)

  • The highest impact strength and break strength

  • Operation temperature in a range of -200 °C to +100 °C

  • High chemical resistance

  • Vibration damping

  • No moisture absorption

  • No corrosion

We are at your disposal if you need technical advice on our materials and provide you all technical information.

CONTACT

+7 (499) 951-79-41

+7 (968) 404-13-85

English Hotline

ADDRESS

Bratislavskaya Street 6

109341 Moscow

Monday - Friday
9 am - 6 pm

Copyright © 2021 LLC, TD Plastmass Group. All Rights Reserved.