AGRICULTURE INDUSTRY

PLASTICS FOR AN EFFICIENT AND SUSTAINABLE AGRICULTURE

  • BUSHINGS IN AGRICULTURAL MACHINERY

    The use of PLASTMASS™ PET (Polyethylene terephthalate) plastics significantly reduces the friction and wear on bushings. The service life of the plain bearing is doubled and the maintenance requirements of machine parts are reduced.

  • REAR-AXLE SUSPENSION

    PLASTMASS™ PET (Polyethylene terephthalate) bushings are unbreakable and ensure that leaf spring systems last longer. This eliminates the problem of broken bronze bushings and increased axle wear.

  • BEARINGS IN HARVESTING MACHINES

    The use of PLASTMASS™ PET MT (Polyethylene terephthalate) plastic reduces friction and wear. This means a longer component life and less maintenance.

  • BUSHINGS FOR CULTIVATORS

    PLASTMASS™ PET (Polyethylene terephthalate) plastic bushings for the moving parts of the cultivator.

  • BALANCE AND LEVER BUSHINGS

    Compensating and lever plastic bushes are used in the trailer coupling of agricultural machines.

  • BUSHINGS IN LIFTING MECHANISMS

    In crane lifting mechanisms, the PLASTMASS™ PEI (Polyetherimide) plastic bushings withstand a load of up to 110 MPa.

  • ROLLING BEARINGS

    PLASTMASS™ PEEK VMT (Polyetheretherketone) plastic is used for rolling bearings, in dry operation at 286 °C with steam pressure. Even under these conditions, the plastic is particularly resistant to abrasive particles.

  • LINING OF TRUCK BODIES AND TRAILERS

    PLASTMASS™ UHMWPE/HMWPE (PE-1000/PE-500 - Polyethylene) is used to line truck bodies, trailers and semi-trailers.

  • LINING OF WORKING SURFACES

    PLASTMASS™ UHMWPE/HMWPE (PE-1000/PE-500 - Polyethylene) plastic linings significantly increase the service life of the work surfaces (protection against sticking, freezing and abrasion).

  • LINING OF BUCKETS

    Excavator buckets lined with PLASTMASS™ PU (Polyurethane) are less susceptible to rust from damage to the protective metal layer.

Benefits of using Engineering Plastics & High Performance Plastics

  • Sliding properties of engineering plastics and high performance plastics are better than bronze

  • The low coefficient of friction of our plastics significantly increases the lifespan of the sliding parts

  • Engineering plastics and high performance plastics can be operated without lubrication - a failure of the lubrication system does not lead to an immediate shutdown

  • Our plastics reduce noise and increase the shock and vibration resistance of sliding units

  • Engineering plastics and high performance plastics do not require running-in due to increased elasticity

  • High positioning accuracy and freedom of movement with small feeds

  • Works in dirty conditions with high abrasion resistance

  • Not susceptible to corrosion

  • Higher chemical resistance compared to bronze

  • Moisture absorption coefficient under 0.3% 

  • High dimensional stability

  • Frost resistance at temperatures down to -100 °C

  • Consistent properties during long-term operation

We are at your disposal if you need technical advice on our materials and provide you all technical information.

CONTACT

+7 (499) 951-79-41

+7 (968) 404-13-85

English Hotline

ADDRESS

Bratislavskaya Street 6

109341 Moscow

Monday - Friday
9 am - 6 pm

Copyright © 2021 LLC, TD Plastmass Group. All Rights Reserved.